The Winner vibrating screen is a new screening product innovatively developed by Winner AG, which has successfully solved the major technical problem of wet and sticky lumps of ore that is difficult to screen. It uses large amplitude, large vibration intensity, lower vibration frequency and highly elastic polyurethane anti-blocking screen plate to complete the screening process of wet sticky lump ore. The speed of throwing lumps up is 2.72 times greater than that of ordinary vibrating screens. The inertial force generated by ordinary vibrating screens is 3.23 times that of gravity. The inertial force generated by WINNER vibrating screens is 22.85 times that of gravity. The adhesion force of the screen plate to break away is 7 times that of ordinary sieves. Once this equipment was launched, it was favored by many steel companies.
Structural features:
1. Relaxation independent sieve plate vibration:
The mechanical structure of the traditional screen is changed, and a motion mode is adopted in which the independent relaxation screen surface vibrates but the screen frame and screen box do not vibrate. Multiple sections of relaxation screen surfaces vibrate independently from the feed end to the discharge end. The high elastic polyurethane relaxation screen is used. Due to the relaxation effect of the high elastic polyurethane during the vibration process, the material is thrown up, which solves the problem of easy blockage of the material.
2. High screening efficiency:
Screening can be divided into two stages: stratification and through-screening. According to different working conditions such as on-site material processing volume, particle size composition, moisture content, etc., the screen surface of each section of the upper and lower layers can be freely adjusted to high frequency and low amplitude, and low frequency and high amplitude. Adjustment, low frequency and high amplitude is to achieve stratification, high frequency and low amplitude is to increase the screening rate, and the combination of the two can achieve better screening results.
3. Energy saving:
Compared with screening equipment with the same processing capacity, the vibration mass is small, the vibration source structure is small, the motor power is reduced by more than 40%, the weight of the whole machine is more than 30% lighter than traditional screens, and maintenance is more convenient.
4. Environmental protection:
All inlets and outlets of the screen can be connected to other related equipment in a rigid and sealed manner, so that the entire screening operation can be carried out in a fully sealed state. Air can be sucked through the specially designed dust removal port on the screen frame, so that the entire system can be carried out under negative pressure. work, thereby solving the problem of dust pollution during the screening process.
WINNER has focused on screening and sorting technology and research for nearly 70 years. Its profound industry accumulation provides a strong guarantee for solving various screening problems. Welcome to call us for consultation: +86 13373745380!